Analysis of Cone Crusher Maintenance
Cone crusher is suitable to crush medium-hardness of various minerals and more rocks. Reliable structure, high efficiency, easy adjustment and economic characteristics. Ore crushing chamber by the use of decision type, standard type for the broken; medium suitable in the crushing; short head type is suitable for crushing due to cone crusher expensive and poor working conditions, so the cone crusher of routine maintenance can not be ignored in the Analysis of Heavy Industry, SBM cone crusher maintenance method:
(1) cone crusher according to the provisions of the specification, selection of a suitable hydraulic oil.
(2) the use of closed fuel tank, crusher installed at the entrance in the fuel tank air filter with a certain accuracy.
(3) during use, should prevent the water, emulsion, dust, debris and other mechanical fiber debris intrusion.
(4) hydraulic cone crusher should be appropriate fuel oil. Breakers hydraulic oil tank piping and components in the system is full of oil, should maintain the required oil level range.
(5) components, piping and systems put into use, must be rigorous clean.
(6) The fuel filter must be strict. Always check the oil filter crusher, crushing machine found to be promptly replaced when dirty.
(7) regularly check the quality of hydraulic oil, hydraulic oil to keep clean.
(8) the replacement of the oil hydraulic cone crusher, the attention to the work should be finished just in the mechanical, hydraulic oil heat while crushing machine when released, so easy to mechanical impurities, oil, etc. out. Crusher concrete way: to manipulate the working device placed in the highest position, the breaker turned off the engine, using its weight down, completely drain the tank, then thoroughly clean the tank and the corresponding line, adding a new hydraulic oil.
(9) the correct cleaning the hydraulic system. The best use of the system with the cleaning fluid passes, the same crusher grade hydraulic oil. Never use kerosene or diesel fuel for cleaning fluid.