Rolling stone installation methods and considerations
Installation of roller type crushed stone base is cast iron frame, but there are also made of cast or rolled steel welded frame, due to the strength and stiffness of the frame requirements when installing base level should be maintained, and shall not use hammer hammering base. Support generally use rolling stone crusher rollers of train axle box bearing, so the installation, open a metres above sea level, on the in the axle box 30~45du inclined to install movable cover, so that when replacing the bearings easy. When installing the roller, carefully aligning centers, and as dynamic balance test, or roll in operation will "bounce", and soon the entire machine damage. Toothed rollers there are three: first with a hard carbon steel forged or metal tooth inlay and fixed on the rollers, such as fasten with a wedge, the COGS are unreliable, repair and demolition are very difficult.
How To Operate And Maintain Roller Press
1) Roller surface of roller press need to be regularly maintained.
Operation and maintenance roll crusher
To ensure maximum performance of the crusher rolls, the load evenly between continuously along the entire length of the roll, should check regularly blocked discharge mouth phenomenon, and if the engine has stopped working to stop eating before falling when blocks of material, rolling in any idle motivations may fail.