The basic structure and working principle of the squirrel-cage crusher
Traditional squirrel cage crusher from the base, the size of the squirrel cage wheel up and down the hood, pulleys and motor parts. The size of the squirrel cage wheel from the inside perimeter and twice hit stick. The hit stick riveted squirrel cage formed in the ring plate. Flange on the squirrel-cage key and squirrel axle assembly composed of two sets of empty sets with cage wheel. Have the squirrel cage axle mounted on an adapter sleeve Double row spherical roller bearings (self-aligning type), bearing through the bearing fixed in the seat, the other end of the shaft is equipped with pulleys, by Triangle tape and motor connection. Squirrel cage wheel at the top and sidewalls fitted with scraper cleaning machine in operation cast positive material. Squirrel cage wheel mounted on the hood, the hood is fixed to the base unit. Hood equipped with a chamber board at the top can be replaced after wear. Hood open valve, used to clean up the plot material glued to the machine housing. Valve is locked when the machine is running. Feed inlet on the side of the hood, the discharge port built-in adjustable feed position adjusting plate (cutting tongue). Discharge port open off the entrance and exit, the output of the crushed material from the transport machinery.
Squirrel-cage crusher at work, driven by two electric motors reverse rotation of the two groups of squirrel cage wheel at different speeds. Raw material from the inlet into the squirrel cage wheel center region by adjusting the plate by the impact and friction between the direction of rotation of the four groups of repeated hammering and raw materials hit the stick in the whereabouts of the process, after being crushed fine material falling from the discharge port, and then transported by belt conveyor to a squirrel-cage crusher, and sent to the pulverized coal silo, the briquettes molding machine or a honeycomb briquette molding machine.